KE6JGM WiresX Repeater
KE6JGM WiresX repeater works both FM and C4FM on 70cm
C4FM/FM 446.420 – offset FM-DCS 432 & WiresX 01966
Hemet’s own, XLX618 & XLX318, Cross Mode Reflectors
These reflectors are available for any licensed ham to use!
Have fun and enjoy! Please come to me will any questions you may have. (KN6RBP) 73
They each have 26 Modules, and support DStar, DMR and of course, C4FM.
C4FM and DMR trans-code on all modules. DStar also works on all modules, but without trans-coding. Traffic on B,E,H,I,J,R are linked to the same module on the other reflector.
Please use DN, not VW mode, on Bob’s repeater. Neither XLX or DMR support it.
VW does work on Bob’s repeater, however that traffic won’t be heard on either reflector.
Not using VW is generally, a good practice, on linked, digital voice systems, like America Link & KC Wide (ironically).
XLX318 is now serving the “Hemet Hangout” in addition to 25 other rooms or modules.
XLX618 is the WiresX bridged HHO reflector and also has 26 modules/rooms.
Module A is the international linked XLX886 room.
Module H is the Hemet Hangout on either reflector, and is also linked with
Bob’s (KE6JGM) Repeater, as well as WiresX 01966.
Use WiresX commands or DGID to use the other modules with C4FM.
DMR may access any module with a hotspot. Use XLX Master, then select the reflector and module of your choice.
DMR and C4FM stations may talk on any module, and be heard by the other mode.
Currently, DStar may use either reflector to talk to other DStar stations only. DStar users should NOT use module H (Hemet Hangout). Module A or D on either XLX318 or XLX618 is recommended for DStar users.
Module E is linked and set aside for EMERGENCY, (ARES, RACES) traffic.
DStar trans-coding, as well as DMR TG and linking to other XLX reflectors, is planned.
Below are the Dashboard links.
- XLX318 HEMET HANGOUT Multi-Mode Wiresx Reflector with 26 modules
- XLX618 KE6JGM Wiresx-Hemet Hangout Link with 10 modules.
Use them for module info. Also see where people are, and find other active reflectors.
Note* Steering Bob’s Repeater with WiresX, directs the linked room
to module H (Hemet Hangout) as well.
DStar users, please don’t use module H. Modules B or I,
are recommended for DStar stations at this time.
